タムラ ショウイチ
TAMURA Shoichi
田村 昌一
所属
東京電機大学 工学部 機械工学科
東京電機大学大学院 先端科学技術研究科 機械システム工学専攻
東京電機大学大学院 工学研究科 機械工学専攻
職種
教授
著書・論文歴
1.
論文
Cutting Forces in Ball End Milling of Rolled Titanium Alloy with Crystallographic Texture Proceedings of The 11th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (共著) 2025/12/01
2.
論文
Effect of Anisotropy Intensity on Orthogonal Cutting of Rolled Ti-6Al-4V Proceedings of The 11th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (共著) 2025/12/01
3.
論文
Measuring the state of electro-abrasive polishing using FFT frequency analysis of acoustic emission signals, Proceedings of The 11th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (共著) 2025/12/01
4.
論文
Influence of Frictional Behavior Under MQL on Cutting Process in Shoulder Milling Ti-6Al-4V Int. J. of Automation Technology 19 (5),811-819頁 (共著) 2025/09/05
5.
論文
High feed rate milling of carbon fiber reinforced plastic with PCD tool Manufacturing Letters 44,687-693頁 (共著) 2025/09/02
6.
論文
Effect of ultrashort pulse laser parameters on periodic structure and friction properties of cemented carbide cutting tool ESAFORM2025 54,1766-1776頁 (共著) 2025/05/07
7.
論文
Influence of Thinning Design on Cutting Process in Drilling ESAFORM2025 54,1729-1736頁 (共著) 2025/05/07
8.
論文
Process design for drilling of large diameter holes with cutting simulation Procedia CIRP 133,430-435頁 (共著) 2025/04/03
9.
論文
Analysis of Tool Wear Rate during a Rotation of Cutter in Fly Cutting Defect and Diffusion Forum 441 (1),11-18頁 (共著) 2025/03
10.
論文
Cutting Process of Rolled Ti-6Al-4V in Drilling of Countersunk Hole Key Engineering Materials 1010 (1),3-11頁 (共著) 2025/03
11.
論文
Anisotropy in Chip Formation in Orthogonal Cutting of Rolled Ti-6Al-4V Journal of Manufacturing Science and Engineering 147 (1),011002 (共著) 2025/01
12.
論文
Analysis of Cutting Process in Tapping Proceedings of ICPE2024,OS05-23 (共著) 2024/10
13.
論文
Analysis of Machining Process with Feed Rate Control in Drilling Proceedings of ICPE2024,OS05-24 (共著) 2024/10
14.
論文
Brittle Fracture in Subsurface of Cemented Carbide Finished in Milling Proceedings of ICPE2024,OS05-21 (共著) 2024/10
15.
論文
Cutting Force in Countersinking of Rolled Titanium Alloy Proceedings of ICPE2024,OS05-28 (共著) 2024/10
16.
論文
Cutting Process of Cemented Carbide in Peripheral Milling,OS05-22 (共著) 2024/10
17.
論文
Effect of Minimum Quantity Lubrication on Cutting Force in Shoulder Milling of Titanium Alloy,OS05-29 (共著) 2024/10
18.
論文
Cutting Process of Rolled Ti-6Al-4V in Drilling of Countersunk Hole 5th International Conference on Machining, Materials and Mechanical Technologies (IC3MT2024),S4-72 (共著) 2024/09
19.
論文
Microstructure Analysis in Milling of Stainless Steel Proceedings of the 7th World Congress on Micro and Nano Manufacturing (共著) 2024/09
20.
論文
Cutting process in non-step drilling of deep hole with tool wear progress Journal of Advanced Mechanical Design, Systems, and Manufacturing 18 (4),JAMDSM0045 (共著) 2024/06
21.
論文
MONITORING OF CHIP FLOW STATE IN DRILLING WITH TOOL WEAR PROGRESS Proceedings of the 2024 International Symposium on Flexible Automation ISFA2024,ISFA2024-139576 (共著) 2024/06
22.
論文
Surface Characterization in milling of aluminum-lithium alloy Proceedings of the ASME 2024 19th International Manufacturing Science and Engineering Conference MSEC2024,MSEC2024-130793 (共著) 2024/06
23.
論文
Effect of Strain Hardening on Burr Control in Drilling of Austenitic Stainless Steel 18 (3),417-425頁 (共著) 2024/05/05
24.
論文
Evaluation Approach for Residual Stress in Drilling of Aluminum Alloy Int. J. of Automation Technology 18 (3),406-416頁 (共著) 2024/05/05
25.
論文
Study of cutting force in milling of aluminum-lithium alloy Materials Research Forum 41,1955-1961頁 (共著) 2024/04
26.
論文
Cutting process in non-step drilling of deep hole with tool wear progress (共著) 2023/06/12
27.
論文
Cutting Force in Peripheral Milling of Cold Work Tool Steel (共著) 2023/04/29
28.
論文
Anisotropic micro cutting of rolled titanium alloy (共著) 2023/01/01
29.
論文
Anisotropy of Cutting Process in Milling of Rolled Titanium Alloy with Single Crystal Diamond End Mill The 19th International Conference on Precision Engineering (共著) 2022/12/01
30.
論文
Cutting Force in Peripheral Milling of Additively Manufactured Maraging Steel International Journal of Automation Technology (共著) 2022/11/05
31.
論文
Cutting Process in Slot Milling of AISI420 Stainless Steel Manufactred in Additive Process Proceedings of the ASME 2021 17th International Manufacturing Science and Engineering Conference MSEC2022 (共著) 2022/09/30
32.
論文
Cutting Force in Drilling with Flat Bottom Drill Key Engineering Materials (共著) 2022/07/22
33.
論文
Effect of Tool Material Property on Cutting Temperature in Drilling (共著) 2022/07/07
34.
その他
難削系材料の切削プロセスの改善 材料特性を活かしたアプローチ 日刊工業新聞,28-29頁 (単著) 2024/11/01