教員情報 - 渡利　久規 | 東京電機大学

ワタリ　ヒサキ WATARI Hisaki
渡利　久規

所属東京電機大学理工学部理工学科　機械工学系

東京電機大学大学院先端科学技術研究科機械システム工学専攻

東京電機大学大学院理工学研究科機械工学専攻

職種教授

学会発表
1.	2024/04/25	Improving room temperature formability of twin-roll cast Mg-Al-Zn-Sn alloy by repeated bending (The 27th International ESAFORM Conference on Material Forming(ESAFORM 2024))
2.	2024/05/15	Mg-9%Al-1%Zn-2%Sn双ロール材の冷間曲げ成形性に繰返し曲げとショットピーニングが及ぼす影響 (2024年度塑性加工春季講演会)
3.	2024/05/11	Mg合金と樹脂積層材の接合法および冷間成形性 (軽金属学会146回春季大会)
4.	2023/05/24	銅合金ロールを用いたAM系高アルミニウム含有マグネシウム合金双ロール鋳造材の結晶組織 (軽金属学会第144回春季大会)
5.	2023/07/05	Cold formability of twin-roll cast Mg-Al-Zn-Sn alloys by applying solution heat treatment and repeatedly cold bending (Thermec 2023)
6.	2023/06/14	Improvement of mechanical property of cast Al-Mg alloy using hot forging (The International conference on Leading Edge Manufacturing/Materials&Processing(LEM&P 2023))
7.	2023/06/14	Effects of differential speed cold rolling of static recrystalization of twin-roll cast Mg-Al-Sn alloys (The International conference on Leading Edge Manufacturing/Materials&Processing(LEM&P 2023))
8.	2023/11/11	Mg-Al-Zn-Sn系合金と樹脂積層材の冷間成形 (軽金属学会第145回秋季大会)
9.	2022/11/12	Mg-Al-Sn 系マグネシウム合金鋳造材の動的再結晶に連続析出物の形状と分布が及ぼす影響 (軽金属学会第143回秋季大会)
10.	2022/11/12	Mg-Al-Zn-Sn系合金双ロール鋳造材の静的再結晶に冷間異周速圧延が及ぼす影響 (軽金属学会第143回秋季大会)
11.	2022/11/12	シランカップリング処理したAM100マグネシウム合金鋳造材の接着強度に及ぼす時効処理の影響 (軽金属学会第143回秋季講演会)
12.	2021/06/02	Effects of Tension-compression Asymmetry on Cold Roll Forming of Wrought Magnesium Alloy Sheets (Thermec' 2021)
13.	2021/06/02	Hot forging of Roll Cast Magnesium Alloys with High Aluminum Content (Thermec' 2021)
14.	2021/06/02	Direct Cladding Process of Magnesium and Aluminum alloys by using a horizontal twin roll caster (Thermec' 2021)
15.	2020/09/05	Novel Direct Cladding Process of Magnesium and Aluminum alloys by Using a Horizontal Twin-roll Caster (The 9th International Conference of Engineering and Innovative Materials (ICEIM2020))
16.	2019/11/20	Springback estimation in cold roll froming of wrought magnesium alloy (Asia Pacific Measurement Forum on Mechanical Quantities 2019)
17.	2019/10/18	Future Possibilities of Hot Forging of Magnesium Alloys (2nd Global Forging Summit China 2019)
18.	2019/09/07	Cold Roll Forming of Wrought Magnesium Alloys with Tension-Compression Asymetry (8th International Conference on Engineering and Innovative Materials (ICEIM2019))
19.	2019/08/24	Estimation of Cold Roll Forming Chracteristics of Wrought Magnesium Alloy with Tension-compression Asymetry (The 4th International Conference on Material Engineering and Application (4th ICMEA 2019))
20.	2019/08/24	Effect of Cr and Si Contents on the Magnetic and Mechanical Properties of Fe-Cr-Si Alloys by MIM Process (The 4th International Conference on Material Engineering and Application (4th ICMEA 2019))
21.	2019/08/24	Casting of high aluminum content AM series magnesium alloys by using a horizontal twin roll caster (The 4th International Conference on Material Engineering and Application (4th ICMEA 2019))
22.	2019/07/02	Springback estimation in cold roll forming of wrought magnesium alloy (Asia Pacific Measurement Forum on Mechanical Quantities 2019)
23.	2019/11/02	双ロールキャスティングによるAM系高アルミニウム含有マグネシウム合金の製造 (軽金属学会第137回秋季大会)
24.	2019/11/02	展伸用マグネシウム合金の冷間ロール成形プロセスにおける引張・圧縮非対称性の影響 (軽金属学会第137回秋季大会)
25.	2019/11/02	縦型双ロールキャスターを用いた高Al合金含有Mg合金の製造 (軽金属学会第137回秋季大会)
26.	2018/09/11	Future Possibilities of Magnesium Alloys in Transportation Industry (7th International Conference on Engineering and Innovative Materials (ICEIM2018))
27.	2018/09/06	Characteristic features of wrought magnesium alloys during cold roll forming process (The international Conference on Advances in Materials and Processing Technologies AMPT2018)
28.	2018/09/05	Horizontal Twin Roll Casting of AM-series Magnesium Alloys with High Aluminum Content (The international Conference on Advances in Materials and Processing Technologies AMPT2018)
29.	2017/11/04	マグネシウム合金展伸材の冷間ロール成形特性 (軽金属学会第133回秋期大会)
30.	2017/11/04	Al合金双ロールキャスト材の鍛造特性 (軽金属学会第133回秋期大会)
31.	2017/11/04	高Al含有ＴＲＣマグネシウム合板材の熱間鍛造特性 (軽金属学会第133回秋期大会)
32.	2017/04/27	Cold roll forming behavior considering spring back of wrought magnesium alloy sheet (20th International ESAFORM Conference on Material Forming(ESAFORM 2017))
33.	2017/04/27	Solidification of aluminum alloys by using twin roll casting process (20th International ESAFORM Conference on Material Forming (ESAFORM 2017))
34.	2017/04/27	Hot Forging of roll cast high high aluminum content magnesium alloys (20th International ESAFORM Conference on Material Forming (ESAFORM 2017))
35.	2016/11/08	CHARACTERISTIC OF CAST TWIN ROLL Mg MATERIALS MANUFACTURED WITH HIGH ALUMINUM CONTENT DURING HOT FORGING (Advances in Materials and Processing Technologies, 2016 (AMPT 2016))
36.	2016/11/08	HOT FORGING BEHAVIOR OF HIGH ALUMINUM CONTENT MAGNESIUM ALLOYS MANUFACTURED BY HORIZONTAL TWINROLL CASTER (Advances in Materials and Processing Technologies, 2016 (AMPT 2016))
37.	2016/11/08	EFFECTS OF ROLL MATERIALS ON RAPID SOLIDIFICATION DURING HORIZONTAL TWIN ROLL CASTING PROCESS (Advances in Materials and Processing Technologies, 2016 (AMPT 2016))
38.	2016/11/10	COLD ROLL FORMING OF V-SECTION OF WROUGHT MAGNESIUM ALLOY SHEETS (Advances in Materials and Processing Technologies, 2016 (AMPT 2016))
39.	2016/11/05	Aｌ合金双ロールキャスト材の特性にロール材質が与える影響 (軽金属学会第131回秋期大会)
40.	2016/11/05	展伸用Mｇ合金の冷間ロール成形特性 (軽金属学会第131回秋期大会)
41.	2016/11/05	高Al含有Mg合金双ロールキャスト材の熱間鍛造性 (軽金属学会第131回秋期大会)
42.	2014/01/11	Inward-Looking Japanese Young People: A Case on the Second Year Engineering Students of a Rural National University (2014 International Conference on Education Reform and Modern Management (ERMM-14))
43.	2004/06/14	Coarse Preconditioning for Imperfect Contact Problems in Pressure Die Casting (Numiform 2004)
44.	2004/06/15	Semi-solid Twin-roll Casting Process of Magnesium Alloy Sheets (Numiform 2004)
45.	2004/06/16	Thermal Modelling In Pressure Die Casting (Numiform 2004)