ヤマザキ タカノリ
YAMAZAKI Takanori
山崎 敬則
所属
東京電機大学 理工学部 理工学科 機械工学系
東京電機大学大学院 先端科学技術研究科 機械システム工学専攻
東京電機大学大学院 理工学研究科 機械工学専攻
職種
教授
著書・論文歴
1.
論文
低硬度圧縮成形体の硬さの評価 材料試験技術 69 (1),3-8頁 (共著) 2024/01
2.
論文
Analysis of Powder Behavior Inside the Mortar During Tableting Process Proceedings of the 20th International Conference on Informatics in Control, Automation and Robotics 2,297-301頁 (共著) 2023/11
3.
論文
Design of Acceleration Command for Feed Drive System in Corner Motion Proceedings of the 20th International Conference on Informatics in Control, Automation and Robotics 2,311-315頁 (共著) 2023/11
4.
論文
Relationship Between Tableting Motion and Tablet Hardness in Compression Molding Proceedings of the 20th International Conference on Informatics in Control, Automation and Robotics 2,302-306頁 (共著) 2023/11
5.
論文
Experimental analysis of friction behaviour for different linear guideways Joint IMEKO TC3, T5, TC16 and TC22 International Conferenc,TC3P-48 (共著) 2022/10
6.
論文
Simplified model of mass measurement system with consideration of variation of fulcrum position Joint IMEKO TC3, T5, TC16 and TC22 International Conference,TC3P-3 (共著) 2022/10
7.
論文
HIGH ACCURACY TRACKING CONTROL BY ZERO PHASE ERROR TRACKING CONTROL UNDER ACTUATOR SATURATION Proceedings of the 2022 International Symposium on Flexible Automation,430-435頁 (共著) 2022/07
8.
論文
Dynamic force behavior for linear guideways with balls of different materials Measurement: Sensors 18,100280 (共著) 2021/12
9.
論文
Mathematical model in dynamic mass measurement with consideration of position variation of fulcrum point Measurement: Sensors, 18,100164 (共著) 2021/12
10.
論文
VIBRATION COMPENSATION USING DUMMY LOAD-CELL IN DYNAMIC MASS MEASUREMENT ACTA IMEKO 9 (5),75-78頁 (共著) 2020/12
11.
論文
Dynamic Behavior Analysis of Feed Drive System Using Linear Guideways with Different Ball Diameters Materials Science and Engineering 811,012049 (共著) 2020/05
12.
論文
Vibration Compensation of Checkweigher Using Acceleration Sensor Materials Science and Engineering 811,012050 (共著) 2020/05
13.
論文
Dynamic Behavior of Feed Drive Systems using Different Linear Guideways Asia Pacific Measurement Forum on Mechanical Quantities 2019 (APMF 2019),F-9 (共著) 2019/11
14.
論文
Vibration compensation for checkweigher using dummy load cell Asia Pacific Measurement Forum on Mechanical Quantities 2019 (APMF 2019),M-10 (共著) 2019/11
15.
論文
Prototype and Evaluation of Cutting Force Testing Machine for Hand Work Tools Materials Science and Engineering 507,012035 (共著) 2019/04
16.
論文
Dynamic behavior of mass measurement system using load-cell (2nd report) -Effect of partial load distribution- Journal of Physics: Conf. Series 1065,042048 (共著) 2018/08
17.
論文
Reduction of vibration for feed drive system using linear motor at high-speed driving Journal of Physics: Conf. Series 1065,222011 (共著) 2018/08
18.
論文
Reduction of the effect of floor vibrations in a checkweigher using an electromagnetic force balance system (共著) 2017/07
19.
論文
Experimental Study on Dynamic Behavior of High Precision Servo Motor for Machine Tools (単著) 2017/02
20.
論文
Characteristic Feature of Dynamic Motion for Servo Press Machine by Direct Modeling Analysis Applied Mechanics and Materials 772,192-196頁 (共著) 2015/07
21.
論文
Mathematical model of checkweigher with electromagnetic force compensation ACTA IMEKO 3 (2),9-13頁 (共著) 2014/06
22.
論文
Simplified Dynamic Model for High-speed Checkweigher International Journal of Modern Physics: Conference Series 24,1-8頁 (共著) 2013/10
23.
論文
Air-conditioning PID Control System with Adjustable Reset to Offset Thermal Loads Upsets,209-228頁 (共著) 2011
24.
論文
Impact of Decentralized Controllers for Temperature Control on Control Performance ASHRAE Transactions 117 (2),830-837頁 (共著) 2011